How much water does a 10.5 × 5.2 m pool hold?

About 46.7 m³ (46.7 tonnes of water) at 1.2–2.0 m depth — computed from the actual pool outline, not a rule of thumb.

How long does it take to fill?

Roughly 31 hours from a standard garden tap (~1.5 m³/h). A water delivery service fills it in a few hours.

Is this size right for my garden?

The water surface is 32.3 m²; plan roughly 1.5–2× that footprint including the surrounding deck. Open the plan in the designer and set your own deck margins to see the full footprint.

Can I change the depth or edge type?

Yes — open the plan in the designer and adjust depths, edge system (skimmer, deck-level overflow or raised), finishes and accessories freely.

Pool plan

10.5 × 5.2 m Figure 8 · pool plan

Estate pool

About this pool

An estate-class pool: resort presence at home, with room for swimming, play and lounging at the same time. At this size the supporting decisions matter as much as the basin — plan generous decks, a solid heat source and an automatic cover from day one, because every square metre of water is heated, treated and covered.

The figure 8 pinches its waist between two round lobes, giving a soft, playful outline with genuinely separate zones: a bigger lobe for swimming and splashing, a smaller one for steps, kids or a spa corner. The narrow waist is also the natural place for a handrail or a divider net.

Open in the 3D designer

Free · no signup · runs in your browser

Plan view, 10.5 × 5.2 m — drawn to scale

The numbers, computed

Water surface: 32.3 m²
Water volume: 46.7 m³ (46,728 L)
Perimeter: 23.7 m
Depth: 1.2–2.0 m
Excavation approx.: 72 m³
Fill time (garden tap): 31 hours
Skimmers needed: 2×
Heat pump size: 17 kW

Figures are computed from the sampled pool outline and the plan's depths — the same geometry the 3D designer uses. Excavation includes shell and working allowance; your site conditions may differ.

Questions about this plan

How much water does a 10.5 × 5.2 m pool hold?: About 46.7 m³ (46.7 tonnes of water) at 1.2–2.0 m depth — computed from the actual pool outline, not a rule of thumb.
How long does it take to fill?: Roughly 31 hours from a standard garden tap (~1.5 m³/h). A water delivery service fills it in a few hours.
Is this size right for my garden?: The water surface is 32.3 m²; plan roughly 1.5–2× that footprint including the surrounding deck. Open the plan in the designer and set your own deck margins to see the full footprint.
Can I change the depth or edge type?: Yes — open the plan in the designer and adjust depths, edge system (skimmer, deck-level overflow or raised), finishes and accessories freely.